A snowplow is designed to remove new-fallen snow, snow drifts and mass of snow from the surface of roads with hard pavement, as well as from any squares and parking areas with hard paving (asphalt, concrete, paving slab, blocks).

If you have any questions, please contact our consultants by e-mail or leave your phone number and we will call you back.

Specifications*:
 Parameter name  Value
 Type of equipment  attached
 Basic vehicle:  Truck with unladen weight from 6 to 15 tons
 Effective width, m  2,5
 Incidence angle of the plow knives  80
 Operating speed, km/h  up to 50
 Installation time (dismantling) on the base vehicle, h  0,1
 Plow blade thickness, mm  5
 Volume of the hydraulic tank, l  5
 Overall dimensions (length x width x height), mm  3000x1790x2100
 Attachment weight, kg   660

* The manufacturer reserves the right to change specifications without any prior notice.

Additional Information

The snowplow assembly is supplied separately, or installed as additional special equipment on the vehicles registered as special road vehicles, as well as other vehicles with unladen weight minimum 6 tons, with electrical system in vehicle network 24V, mounting plate in accordance with standard EN 15432 F1.

The snowplow has a block type of execution and consists of the following components:

  • plow bodies with polyethylene blade;
  • lifting frames with turning mechanism;
  • attachment plates;
  • hydraulic stations;
  • overall light alarm;
  • electrical control systems.

When ordering mounting to the vehicle in the front of its frame, individual brackets are installed for each (designed after vehicle providing to the company), to which the mounting plate is attached in accordance with standard EN 15432 F1. The snowplow attachment will be made on the plate. The possibility to install components missing on the vehicle is agreed separately for each order and is paid in accordance with the addendum to the contract.

 

Find a dealer in your region

Leave a request